Set the inner, die-face or outer size and the caliper, see the net and a folding solid, then export SVG, PDF or DXF.
Enter inner, die-face, or outer sizes. Die face is the crease-to-crease panel; board caliper T converts all three.
Stop anywhere between flat and shut. Preview only — the die file does not change.
Typical 0.3–5 mm
MakePk offers box, sleeve and envelope dielines with SVG, PDF and DXF export. Dimension definitions vary: envelopes use nominal body dimensions without caliper conversion. Selected box styles include interactive folding. Check each tool’s notes and make a sample.
MakePk free packaging tools — more coming
Die face
—
Inner
—
Approx. outer
—
Drag to turn · scroll to zoom
A mailer folds from one sheet into a base, four walls and a hinged top lid. Roll-end side walls double back and lock into base slots; the lid has a front tuck and side dust ears. The base is not a second tuck-end lid.
Measure the product and allow for inserts and assembly. For this mailer, inner sizes become die faces Lm=L+4T, Wm=W+2T, Hm=H+2T. Other box styles use different formulas. Check the die and folding preview, then make a physical sample.
Mailers usually use 1.5–3 mm corrugated or 1.0–1.5 mm solid board. Thicker board tightens the locks, so check the folding preview before ordering.
| Size (mm) | Caliper | Load |
|---|---|---|
| 150 × 100 × 50 | 1.5 mm | Load |
| 200 × 140 × 50 | 1.5 mm | Load |
| 250 × 200 × 100 | 3 mm | Load |