Drawer box: uses, dimensions and making guide
Suitable uses and product planning
A drawer box combines a sliding tray with an open-ended sleeve. It suits jewellery, stationery, small accessories and gift sets that need an opening reveal. Measure the whole packed product, including tissue, inserts and room for fingers; copying the bare product dimensions can leave a tray that is difficult to empty.
Compare other structures
Choose a drawer for repeated sliding access, a lid-and-base box for a fully exposed top, or a sleeve to wrap an existing container. Sliding fit depends on caliper, the glued seam and surface finish as well as clearance.
Dimension definitions and default parameters
L/W/H are the inner tray model dimensions. T is caliper and C is fit clearance per side. Tray outer size is (L+2T)×(W+2T)×(H+T); sleeve opening adds 2C to that width and height.
| Parameter (mm) | Default | Input range |
|---|---|---|
| Inner length L | 150 | 80–400 |
| Inner width W | 100 | 50–300 |
| Inner height H | 40 | 20–100 |
| Measured caliper T | 1 | 0.2–2 |
| Fit clearance per side C | 0.5 | 0.3–3 |
Worked default example
With L=150, W=100, H=40, T=1 and C=0.5, the tray model outer size is 152×102×41 mm and the sleeve opening is 103×42 mm. C is clearance per side.
Assembly method
Glue the inner-tray corner tabs, then glue the outer sleeve into an open-ended tube. Slide together after drying. Thumb notch affects the inner front rim; windows affect the sleeve. Preview or export both or either piece.
What to check on a physical sample
Cut both pieces and let the glue dry before sliding them together. Check whether the seam catches before increasing clearance. A window weakens the sleeve; test the actual coated board with the filled tray, including the thumb notch and removal of the product.
Preparing files for printing and cutting
Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.
