MakePk
繁中简中EN日本語한국어

Tray dieline generator

One sheet folds into a shallow tray: a bottom panel, four walls, and glue tabs on the left and right walls that fold in and stick to the others.

‹ Back to home

Tray size

L is the bottom length, W the bottom width and H the wall height. Walls fold outside the bottom, so the cavity equals the panel.

mm
mm
mm

Board thickness T

Trays usually use 0.5–2 mm card or grey board; taller walls need thicker board.

How to read sizes

Bleed Cut Crease

Die face
—

Inner
—

Approx. outer
—

Drag to pan · scroll to zoom

What a tray is

A tray is a lidless shallow box used as a gift-box insert, for food or for sample display; the wall height follows the contents.

How the sizes work

The L×W bottom is the cavity and H sets the depth. Outer = bottom + 2T, height = H + T.

Wall height and caliper

Taller walls and thinner board make a floppy tray. 0.5 mm board with a 50 mm wall is already soft; 1 mm or more is safer.

Common sizes (one click to load)

Size (mm)CaliperLoad
150 × 100 × 501 mmLoad
200 × 150 × 601 mmLoad
100 × 100 × 300.5 mmLoad

Common questions

Is a tray the same as the base of a lid and base box?
The base is the lower half of a two-piece box; a tray stands alone and is usually shallower.
Can I add a window?
Yes, the window is cut in the centre of the bottom panel.