Four-flap book wrap: uses, dimensions and making guide
Suitable uses and product planning
A four-way book wrap encloses a flat product with two pairs of overlapping leaves. It suits books, photo collections and thin-item shipping samples. Measure tissue, bags, protective layers and the full stack thickness along with the product; a cover-size measurement alone misses what the side folds must accommodate.
Compare other structures
The wrap needs tape or a seal and is not a glue-free lock. Compare a drawer for repeated access or a mailer for a deeper cavity. Leaf overlap and stacked board layers determine whether the closure sits flat.
Dimension definitions and default parameters
L/W/H are target inner dimensions, T is caliper and O is each leaf’s extension beyond half the base. Base panels are (L+2T)×(W+2T); side-wall folds are H+T and H+2T. Opposing leaves overlap nominally by 2O.
| Parameter (mm) | Default | Input range |
|---|---|---|
| Inner length L | 220 | 100–450 |
| Inner width W | 160 | 80–320 |
| Inner height H | 25 | 8–70 |
| Measured caliper T | 1 | 0.15–2 |
| Leaf overlap O | 15 | 5–30 |
Worked default example
Defaults L=220, W=160, H=25, T=1 and O=15 mm give a 222×162 mm base. The side folds are 26 and 27 mm high; opposing leaves nominally overlap by 30 mm.
Assembly method
Pre-fold the eight scores, place all contents, raise the walls and wrap left/right before front/back. Secure with tape or a seal. This is not a glue-free locking closure; sample the overlap and stacked material thickness.
What to check on a physical sample
Pre-fold all eight scores, place the complete contents and wrap the side leaves before the remaining pair. Inspect book corners, overlapping layers and the sealing area. Recheck fit after changing thickness instead of assuming the same overlap will still close neatly.
Preparing files for printing and cutting
Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.
