MakePk
繁中简中EN日本語한국어

Clamshell box dieline generator

One sheet forms two glued cups joined by a narrow folding spine, with separate lower and lid wall heights.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

L/W size the lower base panel, H is lower wall height, U is lid wall height, T is caliper and C is lid-panel allowance. Lid panel=(L+4T+2C)×(W+4T+2C), spine S=2T+C, with U≤H−6.

mm
mm
mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Clamshell box: uses, dimensions and making guide

Suitable uses and product planning

A hinged clamshell joins two shallow cups with a narrow bridge. It suits small gifts, accessories and separately wrapped snack samples where the lid should remain attached. Measure the lower cup and upper cup separately: the open lid provides display space, but its depth changes the closed structure.

Compare other structures

Compare a separate lid-and-base box for sleeve-like lid overlap. These two cups meet opening-to-opening, with closed height approximately H+U. There is no latch; a seal may be needed. The hinge does not establish sealing or food-contact certification.

Dimension definitions and default parameters

L/W size the lower base panel, H is lower wall height, U is lid wall height, T is caliper and C is lid-panel allowance. Lid panel=(L+4T+2C)×(W+4T+2C), spine S=2T+C, with U≤H−6.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Base panel length L14080–300
Base panel width W10060–240
Lower wall height H4025–100
Lid wall height U2010–60
Measured caliper T0.50.15–1.2
Lid-panel allowance C0.80.3–2

Worked default example

Defaults L=140, W=100, H=40, U=20, T=0.5 and C=0.8 mm give a 141×101 mm lower outer frame, 142.6×102.6 mm upper inner frame and 1.8 mm bridge.

Load these example dimensions

Assembly method

Glue the four corners of each cup, pre-fold the spine and check closure. Ideal closed height is about H+U; real hinge position and caliper need sampling. No front latch is included; use a seal if needed. This is not a certified sealed or food-contact package.

What to check on a physical sample

Glue each cup's corners and let them cure before slowly testing the hinge. Check bridge, corners and sealing position for interference. U must be at least 6 mm less than H. Include the intended inner pack and seal when testing rather than judging an empty box alone.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are dimensions and fit defined?

L/W size the lower base panel, H is lower wall height, U is lid wall height, T is caliper and C is lid-panel allowance. Lid panel=(L+4T+2C)×(W+4T+2C), spine S=2T+C, with U≤H−6.

How do I assemble and sample it?

Glue the four corners of each cup, pre-fold the spine and check closure. Ideal closed height is about H+U; real hinge position and caliper need sampling. No front latch is included; use a seal if needed. This is not a certified sealed or food-contact package.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles