MakePk
繁中简中EN日本語한국어

Hanging tuck carton dieline generator

Retail tuck cartons with a rear header and round or Euro hanging hole.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

L is side depth, W face width and H body height: crease-to-crease panel dimensions. The 32 mm header is additional to H. T adjusts seam/slots, not inner/outer conversion.

mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Hanging tuck carton: uses, dimensions and making guide

Suitable uses and product planning

A hanging tuck carton extends a header above the rear face for peg display. It suits small retail accessories, craft kits and separately bagged products. Decide which product face should be visible before choosing the front width, side depth and body height; the header is display space rather than product capacity.

Compare other structures

Compare a folded header card for an already bagged product, or a plain tuck carton when no peg is needed. Match the hole to the actual retail hook rather than choosing by appearance alone.

Dimension definitions and default parameters

L is side depth, W face width and H body height: crease-to-crease panel dimensions. The 32 mm header is additional to H. T adjusts seam/slots, not inner/outer conversion.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Side depth L6025–250
Face width W9060–300
Body height H14060–400
Measured caliper T0.50.15–2

Worked default example

Defaults are L=60 side depth, W=90 face width, H=140 body height and T=0.5 mm. The header adds 32 mm beyond H; round holes are Ø6 mm and the Euro slot is 32 mm wide.

Load these example dimensions

Assembly method

Glue the tube seam, fold dust flaps, then close both tuck ends. The rear header stays upright. Round hole is Ø6 mm; Euro slot is 32 mm wide. Optional closure slots use narrow tongues; the default uses ordinary tuck tongues.

What to check on a physical sample

Glue the tube, fold the dust flaps and close the tuck ends while leaving the header upright. Hang the filled sample on its intended hook to inspect tearing, forward tilt and loose closures. Optional top slots do not replace the normal bottom closure.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

What dimensions do I enter?

L is side depth, W face width and H body height: crease-to-crease panel dimensions. The 32 mm header is additional to H. T adjusts seam/slots, not inner/outer conversion.

How does it assemble?

Glue the tube seam, fold dust flaps, then close both tuck ends. The rear header stays upright. Round hole is Ø6 mm; Euro slot is 32 mm wide. Optional closure slots use narrow tongues; the default uses ordinary tuck tongues.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles