Sloped display box: uses, dimensions and making guide
Suitable uses and product planning
A sloped display box exposes products behind a low front and taller back. It suits countertop stationery, small retail goods and bagged-item samples. Set the number of product rows and their orientation before choosing the base and wall heights, keeping the front low enough to reveal useful product information.
Compare other structures
Choose a covered structure for enclosure or shipping protection. This is an open display tray without a tear-off cover. Side slope follows the front-to-back height difference; very short fronts or thick board can leave insufficient corner-ear relief.
Dimension definitions and default parameters
L/W size the base panel, H is back-panel height, F is front height and T is caliper. Require H≥F+10 and T≤F/8. The side top connects front to back linearly; these are panel dimensions, not product cavity measurements.
| Parameter (mm) | Default | Input range |
|---|---|---|
| Base panel length L | 160 | 80–400 |
| Base panel width W | 120 | 80–350 |
| Back panel height H | 100 | 50–180 |
| Front panel height F | 35 | 15–80 |
| Measured caliper T | 0.5 | 0.15–2 |
Worked default example
Defaults are a 160×120 mm base, H=100, F=35 and T=0.5 mm, giving side slope 65/120. H must exceed F by at least 10 mm; four glue ears follow the sloped walls.
Assembly method
Pre-fold the walls and ears, then glue front/back ears inside the side walls. Rear ears have slope relief. Test access, standing and support with the intended board. No hanging hole or locking bottom is included.
What to check on a physical sample
Pre-fold the walls and ears, then glue the ears inside adjacent walls. Inspect the sloped rim and rear corners for protruding ears, and the front for bulging when filled. The drawing does not assess product load, stacking or long-term display stability.
Preparing files for printing and cutting
Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.
