MakePk
繁中简中EN日本語한국어

Round tube lid-and-base box dieline generator

Generate a tube wall, base disk, lid ring and lid disk. Adjust diameter, height and clearance.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

D is target inner diameter, H body-wall panel height, U lid-ring height, T caliper, C radial clearance and G side overlap. Assuming a mid-thickness neutral layer, body development is π(D+T); lid inner diameter is D+2T+2C. Add G outside the effective circumference.

mm
mm
mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Round tube lid-and-base box: uses, dimensions and making guide

Suitable uses and product planning

A round tube box uses a body wall, base disk, lid ring and lid-top disk. It suits round products, small gifts and can-shaped items in thin-board samples. Plan inner diameter, removal clearance and lid action first, because the curved wall needs rolling and a glued overlap rather than repeated straight folds.

Compare other structures

Ask a manufacturer for multi-layer tube and wrapping specifications when a rigid wrapped tube is required. This is a single-layer starting model. Compare a hexagonal box if straight scored panels are preferred; do not facet the tube wall to imitate a smooth circle.

Dimension definitions and default parameters

D is target inner diameter, H body-wall panel height, U lid-ring height, T caliper, C radial clearance and G side overlap. Assuming a mid-thickness neutral layer, body development is π(D+T); lid inner diameter is D+2T+2C. Add G outside the effective circumference.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Target body inner diameter D9050–160
Body-wall panel height H12060–220
Lid wall height U2010–40
Measured caliper T0.50.15–1
Fit clearance per side C0.60.3–2
Glue-tab width G128–20

Worked default example

Defaults D=90, H=120, U=20, T=0.5, C=0.6 and G=12 mm give an effective body development of about 284.31 mm and lid inner diameter of 92.2 mm. G is added separately, outside the effective circumference.

Load these example dimensions

Assembly method

Curve and glue the wall seam, turn the end tabs inward and glue the base disk; assemble the lid ring and top similarly. Do not fold the wall into a polygon. Only end-tab roots are scored. Disks use 128-segment approximations; neutral layer, glue and lid fit require samples.

What to check on a physical sample

Export all four parts or select each one. Pre-curve the walls, glue seams, fold end tabs and attach disks. Score tab roots only. Verify springback, adhesive thickness and lid fit physically; disks use 128-segment approximations that the cutting workflow must preserve.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are dimensions and fit defined?

D is target inner diameter, H body-wall panel height, U lid-ring height, T caliper, C radial clearance and G side overlap. Assuming a mid-thickness neutral layer, body development is π(D+T); lid inner diameter is D+2T+2C. Add G outside the effective circumference.

How do I assemble and sample it?

Curve and glue the wall seam, turn the end tabs inward and glue the base disk; assemble the lid ring and top similarly. Do not fold the wall into a polygon. Only end-tab roots are scored. Disks use 128-segment approximations; neutral layer, glue and lid fit require samples.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles