MakePk
繁中简中EN日本語한국어

Ribbon-tie pyramid box dieline generator

Four triangular faces fold around a square base, with a hole in each face for a ribbon or cord closure.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

A is square-base side length and H is ideal vertical height. Face slant height S=√(H²+(A/2)²). No caliper compensation is applied. Hole centers are 72% from base edge to apex; diameter is 2min(3,0.035A).

mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Ribbon-tie pyramid box: uses, dimensions and making guide

Suitable uses and product planning

A square pyramid gift box joins four triangular faces to a square base and gathers them with cord through four holes. It suits small gifts, festive decorations and display samples. The volume narrows toward the apex, so a product fitting the floor can still collide with the sloping faces higher up.

Compare other structures

Compare a conventional box for stacking or a fully enclosed closure. Pyramid sides and apex are not glued seals: powders, liquids and tiny loose contents need a suitable separate inner package rather than direct filling.

Dimension definitions and default parameters

A is square-base side length and H is ideal vertical height. Face slant height S=√(H²+(A/2)²). No caliper compensation is applied. Hole centers are 72% from base edge to apex; diameter is 2min(3,0.035A).

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Square base side A9050–220
Ideal vertical height H8535–180

Worked default example

Defaults A=90 and H=85 mm give an ideal face slant height of about 96.18 mm. Holes are Ø6 mm, positioned 72% from each base edge toward its apex. No caliper compensation is applied.

Load these example dimensions

Assembly method

Pre-fold the four base edges, raise the faces and lace all four holes before tying. The apex and side edges are not adhesively sealed. Do not directly fill with powders or liquids; sample cord choice, tear resistance and product fit.

What to check on a physical sample

Pre-fold the four base edges, place the contents, raise the faces and thread all four holes before tying. Check knot slip, hole tearing and pressure on sloping faces. Resample threading and product removal whenever base size or height changes.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are the dimensions defined?

A is square-base side length and H is ideal vertical height. Face slant height S=√(H²+(A/2)²). No caliper compensation is applied. Hole centers are 72% from base edge to apex; diameter is 2min(3,0.035A).

How do I assemble and sample it?

Pre-fold the four base edges, raise the faces and lace all four holes before tying. The apex and side edges are not adhesively sealed. Do not directly fill with powders or liquids; sample cord choice, tear resistance and product fit.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles