MakePk
繁中简中EN日本語한국어

Folded hanging header card dieline generator

Two card faces and a narrow fold band have mirrored round or Euro holes for sampling bagged retail products.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

W is face width, H single-face height, T caliper and C extra fold allowance. Fold band S=2T+C, flat height 2H+S. Hole profiles mirror across the spine midline; centers sit 0.65H from free edges. Attachment band=min(12,H/4).

mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Folded hanging header card: uses, dimensions and making guide

Suitable uses and product planning

A folded header card sandwiches a bag opening between front and back faces for retail hanging. It suits bagged accessories, craft components and lightweight goods. Establish bag width, sealing height and the intended hook before choosing the card and hole: graphics need room without obscuring attachment areas.

Compare other structures

Compare a hanging tuck carton for a protected box body. A header alone supplies neither a cavity nor cushioning; choose no-hole mode when hanging is unnecessary. Attachment, board caliper and hole edges all influence performance, so hole shape alone cannot establish load capacity.

Dimension definitions and default parameters

W is face width, H single-face height, T caliper and C extra fold allowance. Fold band S=2T+C, flat height 2H+S. Hole profiles mirror across the spine midline; centers sit 0.65H from free edges. Attachment band=min(12,H/4).

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Header face width W10055–220
Single-face height H4530–90
Measured caliper T0.350.15–1
Extra fold allowance C0.40.2–2

Worked default example

Defaults W=100, H=45, T=0.35 and C=0.4 mm give fold gap 2T+C=1.1 mm and total flat height 91.1 mm. Hole centres are 29.25 mm from the free edges and mirror across the spine.

Load these example dimensions

Assembly method

Pre-fold both scores, insert the bag lip at the lower attachment band and use suitable tape or staples. Check matching holes and bag thickness. Staple positions, hanging load and automatic bag sealing are not calculated.

What to check on a physical sample

Pre-fold both scores, place the bag in the lower attachment band and secure with suitable tape or staples. Check aligned holes, bag obstruction and actual hook fit. Staple positions, sealing-machine setup and hanging loads are not calculated automatically.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are dimensions and fit defined?

W is face width, H single-face height, T caliper and C extra fold allowance. Fold band S=2T+C, flat height 2H+S. Hole profiles mirror across the spine midline; centers sit 0.65H from free edges. Attachment band=min(12,H/4).

How do I assemble and sample it?

Pre-fold both scores, insert the bag lip at the lower attachment band and use suitable tape or staples. Check matching holes and bag thickness. Staple positions, hanging load and automatic bag sealing are not calculated.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles