Two-cup carrier: uses, dimensions and making guide
Suitable uses and product planning
A two-cup carrier connects a floor, end walls, two holed decks and a central handle. It provides a paper-sample starting point for takeaway drinks. Size holes from the cup body at the support plane after measuring taper and height; the rim's maximum diameter is not the correct input by default.
Compare other structures
Compare a gusseted bag as an outer carry layer, or add a separate box for enclosure. Geometry does not supply a universal safe load, and symmetric holes do not make every pair of full cups safe to carry.
Dimension definitions and default parameters
D is the deck-hole diameter. Measure cup diameter at the intended support level and sample it; do not infer it from rim diameter. H is support-wall panel height, K handle height, M hole-edge material and T caliper. Floor L=2D+4M and W=D+2M.
| Parameter (mm) | Default | Input range |
|---|---|---|
| Cup-hole diameter D | 80 | 55–100 |
| Support-wall panel H | 55 | 35–95 |
| Handle panel height K | 55 | 40–75 |
| Hole-edge material M | 14 | 10–25 |
| Measured caliper T | 1 | 0.6–1.5 |
Worked default example
Defaults D=80, H=55, K=55, M=14 and T=1 mm give a 216×108 mm floor. Assembled cup centres are at 54 and 162 mm along its length, with a 28 mm gap between holes.
Assembly method
Glue the front/back guard ears to the end supports, fold the decks inward and glue the matching center handle faces. Cup-center spacing is D+2M. No load or wet-strength certification is claimed: test actual cups, adhesive and board. Illustrated cups are props, not dieline parts.
What to check on a physical sample
Glue guard lips and corner ears, then fold end walls, decks and handles. Begin with empty-cup fit, followed by controlled testing of actual contents, board, adhesive, moisture and movement. White cups in the homepage render are props, not exported parts or evidence of load testing.
Preparing files for printing and cutting
Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.
