MakePk
繁中简中EN日本語한국어

Pillow box dieline generator

Curved-crease gift packaging for jewellery, sweets and small lightweight items.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

W is one flat panel width, H the distance between end-curve endpoints, and A the curve sag, not finished thickness. Measure usable space on a sample. Requires H≥2A+24 and A≤0.3W.

mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Pillow box: uses, dimensions and making guide

Suitable uses and product planning

A pillow box closes with curved end flaps, giving lightweight gifts, socks, jewellery or bagged items a rounded outline. Its broad faces provide space for graphics, but the curved ends take up usable volume. Flat panel dimensions alone cannot establish whether a rigid product will fit.

Compare other structures

Compare a tuck carton when standing, stacking or a rectangular cavity matters. Pillow ends are not a seal: powders, liquids and loose tiny pieces need a suitable separate inner pack.

Dimension definitions and default parameters

W is one flat panel width, H the distance between end-curve endpoints, and A the curve sag, not finished thickness. Measure usable space on a sample. Requires H≥2A+24 and A≤0.3W.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
One panel width W10060–240
End-to-end length H14080–400
Curve sag A2010–50
Measured caliper T0.350.15–0.8

Worked default example

Defaults W=100, H=140, A=20 and T=0.35 mm satisfy H≥2A+24 and A≤0.3W. A controls the end curve; it is not finished box thickness.

Load these example dimensions

Assembly method

Wrap the two panels on the straight scores and glue the seam, then press each end flap along its curved crease. Curves export as fine polylines in all formats. The window stays clear of end-curve zones.

What to check on a physical sample

Test curved scoring on the intended board, ease the shell into shape, then close the end flaps. Check for end-flap collisions and pressure on the product. Keep window cuts away from end zones and confirm capacity with a physical sample.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

What dimensions do I enter?

W is one flat panel width, H the distance between end-curve endpoints, and A the curve sag, not finished thickness. Measure usable space on a sample. Requires H≥2A+24 and A≤0.3W.

How does it assemble?

Wrap the two panels on the straight scores and glue the seam, then press each end flap along its curved crease. Curves export as fine polylines in all formats. The window stays clear of end-curve zones.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles