MakePk
繁中简中EN日本語한국어

Six-cell slotted divider dieline generator

Interlock one long and two cross strips through opposing slots to create a 3×2 arrangement for small items.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

L/W are the overall long/cross-strip lengths, H is strip height, T is actual caliper and C is extra slot width. Slots are T+C wide and H/2 deep, at L/3, 2L/3 and W/2. These are not cell-clearance dimensions.

mm
mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Six-cell slotted divider: uses, dimensions and making guide

Suitable uses and product planning

This six-cell divider interlocks one long strip and two cross strips. It helps separate small items inside an existing tray or box, reducing direct contact between products. It has no floor or outside walls: measure the container's actual inner opening and leave suitable assembly clearance before choosing strip lengths.

Compare other structures

Use an outer box and appropriate cushioning for protection; a thin partition is not a shock-rated insert. Cell count is fixed, and overall strip lengths are not individual cell clearances because board and slots occupy space.

Dimension definitions and default parameters

L/W are the overall long/cross-strip lengths, H is strip height, T is actual caliper and C is extra slot width. Slots are T+C wide and H/2 deep, at L/3, 2L/3 and W/2. These are not cell-clearance dimensions.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Long-strip length L18090–600
Cross-strip length W12060–450
Wall height H4520–120
Measured caliper T10.4–3
Slot clearance C0.30.1–1.5

Worked default example

With L=180, W=120, H=45, T=1 and C=0.3 mm, slots are 1.3 mm wide and 22.5 mm deep. Long-strip slots are at 60 and 120 mm; cross-strip slots are at 60 mm.

Load these example dimensions

Assembly method

Keep the long-strip slots up and cross-strip slots down, then push together until the lower edges align. Supply a separate outer box or tray. Download the three pieces individually; no bleed is generated for this insert. Test slot fit with the actual board.

What to check on a physical sample

Keep long-strip slots up and cross-strip slots down, then assemble until all lower edges align. Test the actual board batch for loose or crushing fits. Export three parts at 100% scale; this insert has no bleed outline, and cut lines should not become printed decoration.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are the dimensions defined?

L/W are the overall long/cross-strip lengths, H is strip height, T is actual caliper and C is extra slot width. Slots are T+C wide and H/2 deep, at L/3, 2L/3 and W/2. These are not cell-clearance dimensions.

How do I assemble and sample it?

Keep the long-strip slots up and cross-strip slots down, then push together until the lower edges align. Supply a separate outer box or tray. Download the three pieces individually; no bleed is generated for this insert. Test slot fit with the actual board.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles