MakePk
繁中简中EN日本語한국어

Self-locking tray dieline generator

Open trays with double return walls and four base locks for glue-free assembly.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

L/W are base-panel dimensions and H wall height, not clear space after double walls. The return bridge is 2T, with four base slots for the tabs. Requires T≤H/8.

mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Self-locking tray: uses, dimensions and making guide

Suitable uses and product planning

A locking tray uses folded return walls and floor tabs to hold its form. It suits open presentation, sorting small objects or a gift-box insert. Products remain accessible from above, while the return walls trap the corner ears. Allow for those layers when assessing usable space, rather than treating the base panel as clear internal size.

Compare other structures

Compare a lid-and-base or clamshell box for a cover, and a separate divider for compartments. Lock performance depends on board and scoring: the name does not guarantee secure glue-free assembly with every material.

Dimension definitions and default parameters

L/W are base-panel dimensions and H wall height, not clear space after double walls. The return bridge is 2T, with four base slots for the tabs. Requires T≤H/8.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Base panel length L18080–400
Base panel width W12060–300
Wall height H4015–90
Measured caliper T10.15–3

Worked default example

The default base is 180×120 mm, H=40 and T=1 mm. Return bridges are 2T=2 mm and there are four floor locks. T must not exceed H/8.

Load these example dimensions

Assembly method

Raise front/back walls and turn the corner ears inward. Raise end walls, fold across the caliper bridges, trap the ears under the return walls and seat all four tabs in the floor slots. The notch affects the front rim; windows avoid lock slots.

What to check on a physical sample

Raise the front and back, turn in the ears, fold the end returns over them and seat all four tabs. If tabs are tight, check caliper and cutting accuracy before forcing them. Recheck floor flatness and retention after adding windows or a notch.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

What dimensions do I enter?

L/W are base-panel dimensions and H wall height, not clear space after double walls. The return bridge is 2T, with four base slots for the tabs. Requires T≤H/8.

How does it assemble?

Raise front/back walls and turn the corner ears inward. Raise end walls, fold across the caliper bridges, trap the ears under the return walls and seat all four tabs in the floor slots. The notch affects the front rim; windows avoid lock slots.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles