MakePk
繁中简中EN日本語한국어

Gable handle box dieline generator

Gabled gift cartons with aligned carry holes and a locking top tab.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

L is depth, W face width and H vertical body height, all panel dimensions. The roof adds L/2 height, with slope L/√2 and a 36 mm handle panel beyond it; these are not part of H.

mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Gable handle box: uses, dimensions and making guide

Suitable uses and product planning

A gable box joins a rectangular body, pitched roof and carry panels in one net. It suits gift sets, event handouts and small grouped products. Put the product within the vertical body first: the tapering roof is not all usable product height, even when the unfolded sheet looks spacious.

Compare other structures

Compare an open carrier for direct access or a flat-top carton for stacking. Carry holes, the roof catch and the manual bottom work together, so a handle illustration does not establish a safe load.

Dimension definitions and default parameters

L is depth, W face width and H vertical body height, all panel dimensions. The roof adds L/2 height, with slope L/√2 and a 36 mm handle panel beyond it; these are not part of H.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Side depth L9040–150
Face width W16090–300
Body height H12080–300
Measured caliper T0.60.15–1.5

Worked default example

With L=90, W=160, H=120 and T=0.6 mm, the ideal roof rise is 45 mm and slope length about 63.64 mm. A further 36 mm carry panel is outside H.

Load these example dimensions

Assembly method

Glue the tube and assemble the manual locking bottom. Fold triangular side gussets inward, bring the roof panels together, align carry holes and fold the rear top tab into the front slot. Validate carrying loads on real samples.

What to check on a physical sample

Glue the seam, assemble the bottom, fold the triangular gussets and align the carry holes before closing the roof tab. Test the actual board, adhesive and contents. Check hole edges, top catch and bottom; food-contact suitability requires separate material decisions.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

What dimensions do I enter?

L is depth, W face width and H vertical body height, all panel dimensions. The roof adds L/2 height, with slope L/√2 and a 36 mm handle panel beyond it; these are not part of H.

How does it assemble?

Glue the tube and assemble the manual locking bottom. Fold triangular side gussets inward, bring the roof panels together, align carry holes and fold the rear top tab into the front slot. Validate carrying loads on real samples.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles