MakePk
繁中简中EN日本語한국어

Two-pocket folder dieline generator

Create a two-pocket folder from one sheet. Adjust page size, spine, pocket height and glue tabs.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

W/H size each page, P is pocket height, G is glue-tab width and T is caliper. Spine S=2T+2; pocket root width is W−G−2. After inward glue tabs, nominal opening is W−3G−2, before physical tolerances.

mm
mm
mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Two-pocket folder: uses, dimensions and making guide

Suitable uses and product planning

A two-pocket folder turns one sheet into facing pages, a narrow spine and two lower pockets. It suits proposals, event documents and branded handouts. Pocket glue tabs reduce the insertion opening, so test the actual paper width and number of sheets instead of relying on the folder's outside page width.

Compare other structures

This is a thin folder, not a rigid document box with rated capacity. Compare a book wrap or separate box for thick document packs and shipping. Page size and usable pocket width are different measurements, and frequent opening also affects material choice.

Dimension definitions and default parameters

W/H size each page, P is pocket height, G is glue-tab width and T is caliper. Spine S=2T+2; pocket root width is W−G−2. After inward glue tabs, nominal opening is W−3G−2, before physical tolerances.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Page panel width W260180–280
Page panel height H315240–380
Pocket height P8550–130
Glue-tab width G128–20
Measured caliper T0.40.25–0.8

Worked default example

Defaults W=260, H=315, P=85, G=12 and T=0.4 mm give a 2.8 mm spine, a 246 mm pocket root and a nominal 222 mm pocket opening.

Load these example dimensions

Assembly method

Pre-fold the pocket tabs, turn the pockets inward and glue onto the page panels, then fold both spine scores. Test a few documents against the opening and page height. This is not a rigid capacity-rated document box; page width alone does not establish paper fit.

What to check on a physical sample

Fold pocket tabs, glue the pockets inward and fold both spine scores. Keep adhesive out of the pockets and test a complete document set for width and height. Paper edges must clear the tabs; a narrow spine alone does not establish safe document capacity.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are the dimensions defined?

W/H size each page, P is pocket height, G is glue-tab width and T is caliper. Spine S=2T+2; pocket root width is W−G−2. After inward glue tabs, nominal opening is W−3G−2, before physical tolerances.

How do I assemble and sample it?

Pre-fold the pocket tabs, turn the pockets inward and glue onto the page panels, then fold both spine scores. Test a few documents against the opening and page height. This is not a rigid capacity-rated document box; page width alone does not establish paper fit.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles