MakePk
繁中简中EN日本語한국어

Triangular prism carton dieline generator

Create a triangular tube with three equal panels and glued end caps. Adjust the side width and length.

uses, dimensions and making guide

‹ Back to home

Dimensions and construction

A is the width of each body panel, H is tube length and T is caliper; A is not the finished inner side length. Ideal end altitude is √3A/2. Glue tabs are calculated from the parameters, without machine-specific production allowances.

mm
mm
mm
BleedCutCrease

Current flat size
—

Piece count
—

Drag to pan · scroll to zoom

Triangular prism carton: uses, dimensions and making guide

Suitable uses and product planning

A triangular prism box has three equal-width body faces and two triangular glued caps. It suits long small objects, stationery and distinctive gift samples. Compare the real product cross-section with a folded end sample before sizing: the apex and corners leave less usable space than a rectangular bounding box suggests.

Compare other structures

Choose a reusable tuck-end structure if repeated access is required. Both ends here are glued, rather than removable tuck caps. An equilateral side length also does not equal the diameter of a cylinder that can fit inside.

Dimension definitions and default parameters

A is the width of each body panel, H is tube length and T is caliper; A is not the finished inner side length. Ideal end altitude is √3A/2. Glue tabs are calculated from the parameters, without machine-specific production allowances.

Dimension definitions and default parameters
Parameter (mm)DefaultInput range
Triangular panel side A7040–150
Tube length H16060–350
Measured caliper T0.40.15–1

Worked default example

Defaults A=70, H=160 and T=0.4 mm give an ideal triangular end altitude of about 60.62 mm. A is panel width between scores, before physical losses at folds.

Load these example dimensions

Assembly method

Pre-fold panels and tabs, glue the side seam into a triangular tube, then glue each cap’s tabs inside. Both ends are glued, not reusable tuck closures. Check the actual product against the triangular cross-section before production.

What to check on a physical sample

Pre-fold the three faces and tabs, glue the side seam, then secure the caps. Insert the product before sealing the final end. Check tab overlap, adhesive cure and long-face bowing; an ideal cross-section formula cannot replace a packing sample.

Preparing files for printing and cutting

Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.

How are the dimensions defined?

A is the width of each body panel, H is tube length and T is caliper; A is not the finished inner side length. Ideal end altitude is √3A/2. Glue tabs are calculated from the parameters, without machine-specific production allowances.

How do I assemble and sample it?

Pre-fold panels and tabs, glue the side seam into a triangular tube, then glue each cap’s tabs inside. Both ends are glued, not reusable tuck closures. Check the actual product against the triangular cross-section before production.

Preview and export

Blue cuts, red dashed creases and green 3 mm bleed. Open SVG, PDF or DXF in mm at 100% scale. Options appear only on compatible models; structural tabs and slots remain required.

Related guides and box styles