Triangular prism carton: uses, dimensions and making guide
Suitable uses and product planning
A triangular prism box has three equal-width body faces and two triangular glued caps. It suits long small objects, stationery and distinctive gift samples. Compare the real product cross-section with a folded end sample before sizing: the apex and corners leave less usable space than a rectangular bounding box suggests.
Compare other structures
Choose a reusable tuck-end structure if repeated access is required. Both ends here are glued, rather than removable tuck caps. An equilateral side length also does not equal the diameter of a cylinder that can fit inside.
Dimension definitions and default parameters
A is the width of each body panel, H is tube length and T is caliper; A is not the finished inner side length. Ideal end altitude is √3A/2. Glue tabs are calculated from the parameters, without machine-specific production allowances.
| Parameter (mm) | Default | Input range |
|---|---|---|
| Triangular panel side A | 70 | 40–150 |
| Tube length H | 160 | 60–350 |
| Measured caliper T | 0.4 | 0.15–1 |
Worked default example
Defaults A=70, H=160 and T=0.4 mm give an ideal triangular end altitude of about 60.62 mm. A is panel width between scores, before physical losses at folds.
Assembly method
Pre-fold panels and tabs, glue the side seam into a triangular tube, then glue each cap’s tabs inside. Both ends are glued, not reusable tuck closures. Check the actual product against the triangular cross-section before production.
What to check on a physical sample
Pre-fold the three faces and tabs, glue the side seam, then secure the caps. Insert the product before sealing the final end. Check tab overlap, adhesive cure and long-face bowing; an ideal cross-section formula cannot replace a packing sample.
Preparing files for printing and cutting
Download SVG, PDF or DXF for free. The AI button supplies an Illustrator-compatible SVG, not a native AI file. Keep cuts and creases separate from printable artwork, and add graphics and bleed on a copy. Print PDFs at 100% actual size with automatic fitting disabled, then verify scale against a known dimension. Confirm stock, scoring, cutter and file compatibility with the converter; make a complete physical sample before production.
